41 0 Contents Of Body Repair General Information

General information 

1. →Quality standard  
2. → Workshop equipment  

Safety regulations 

1. → Safety at work  
2. → Information on hazards  
3. → Information on vehicle protection  

Materials 

1. → Materials science  
2. → Use of materials   in outer shell

Handling electrical/electronic equipment, airbags and restraint systems 

1. → Handling electrical   and electronic circuitry equipment and optical fibres
2. → Handling airbags   and restraint systems
3. → EMC screws 

Body dimensions → 

1. → FRAME ALIGNMENT CONTROL BODY DIMENSIONS (760Li)  or  FRAME ALIGNMENT CONTROL BODY DIMENSIONS (760i)  .
2. → BODY GAP DIMENSIONS 

Cavity bulkhead 

1. → Installation of shaped parts  
2. → Position of shaped parts  

Vehicle identification number 

1. → Vehicle identification number, general  
2. → Stamping vehicle identification number  

Repair techniques 

1. → Straightening 
   1. →Straightening aluminum parts  
   2. →Straightening steel parts  
2. → Grinding
   1. → Grinding aluminum parts  
   2. → Grinding steel parts  
3. → Cutting repairs
   1. → Weld in reinforcement plate (steel plate)  
   2. → Sectional repair of extruded aluminum sections with repair elements 
4. → Welding and soldering
   1. → Welding aluminum parts 
   2. → Welding and soldering steel parts  
   3. → Opening weld joints  
5. → Bonding 
   1. →Bonding aluminum parts 
   2. →Bonding steel parts  
   3. → Bonding glass 
   4. → Spot-weld bonding steel parts  
   5. → Opening adhesive bonds  
6. → Riveting
   1. → Riveting aluminum parts  
   2. → Riveting steel parts  
7. → Repair elements
   1. → Aluminum repair elements 
   2. → Steel thread repairs  

Painting 

1. → Corrosion protection  
2. → General Information  
3. → Information / warning labels  
4. → Sectional painting