41 61 000 Hood Lid Removal And Installation
WARNING: This page is about a different car, the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, and 2006 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove and install both gas-filled struts for engine hood.
The following illustration serves as a general guide and is to be applied to the relevant vehicle type.
Release screw (1).
Loosen screw (2).
Remove hood lid.
Installation:
Install engine hood at screw locations on hinge. This dispenses with the need for adjustment after installation.
If this is not possible, adjust engine hood .