41 0 Contents Of Body Repair General Information
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
ALUMINUM HAZARDS REFERENCE CHART
| General information | Quality standard . See 41 00... QUALITY STANDARD . | |
| Workshop equipment . See 41 00... WORKSHOP EQUIPMENT . | ||
| Safety regulations | Safety at work . See 41 00... SAFETY AT WORK . | |
| Information on hazards . See 41 00... INFORMATION ON HAZARDS . | ||
| Information on vehicle protection . See 41 00... INFORMATION ON VEHICLE PROTECTION . | ||
| Materials | Materials science . See 41 00... MATERIALS SCIENCE . | |
| Use of materials in outer shell . See 41 00... USE OF MATERIALS IN OUTER SHELL . | ||
| Handling electrical/electronic equipment, airbags and restraint systems | Handling electrical and electronic circuitry equipment and optical fibres . See 41 00... HANDLING ELECTRICAL AND ELECTRONIC EQUIPMENT . | |
| Handling airbags and restraint systems . See 41 00... HANDLING AIRBAGS AND RESTRAINT SYSTEMS . | ||
| Body dimensions | Frame dimensions . See FRAME ALIGNMENT CONTROL BODY DIMENSIONS (750I) Or 41 00... FRAME ALIGNMENT CONTROL BODY DIMENSIONS (750LI) . | |
| Gap dimensions . See BODY GAP DIMENSIONS . | ||
| Cavity bulkhead | Installation of shaped parts . See 41 00... INSTALLATION OF A CAVITY SEAL WITH CAVITY FOAM , 41 00... INSTALLING A CAVITY BULKHEAD (EXPANDED) or 41 00... INSTALLING A CAVITY BULKHEAD (NOT EXPANDED) . | |
| Position of shaped parts . In order to reduce the interior noise and to prevent condensation water, the cavities are partitioned in specific areas of the body. To do this, shaped parts are inserted in the cavities. These shaped parts adapt themselves optimally due to heating of the body to approx. 180°C by expansion to the shape of the cavities. | ||
| Vehicle identification number | Vehicle identification number, general . See 41 00... VEHICLE IDENTIFICATION NUMBER, GENERAL . | |
| Stamping vehicle identification number . See 41 00... STAMPING VEHICLE IDENTIFICATION NUMBER . | ||
| Repair techniques | Straightening | Straightening aluminum parts . See 41 00... STRAIGHTENING ALUMINUM PARTS . |
| Straightening steel parts . See 41 00... STRAIGHTENING STEEL PARTS . | ||
| Grinding | Grinding aluminum parts . See 41 00... GRINDING ALUMINUM PARTS . | |
| Grinding steel parts . See 41 00... GRINDING STEEL PARTS . | ||
| Cutting repairs | Weld in reinforcement plate (steel plate) . See 41 00... WELDING IN REINFORCEMENT PLATE (STEEL PLATE) . | |
| Welding and soldering | ||
| Welding and soldering steel parts . See 41 00... WELDING AND SOLDERING STEEL PARTS . | ||
| Opening weld joints . See 41 00... OPENING WELD JOINTS . | ||
| Bonding | ||
| Bonding steel parts . See 41 00... BONDING STEEL PARTS . | ||
| Bonding glass . See 51 31... INSTRUCTIONS ON GLUING WINDSCREEN . | ||
| Spot-weld bonding steel parts . See 41 00... SPOT-WELD BONDING STEEL PARTS . | ||
| Opening adhesive bonds . See 41 00... OPENING ADHESIVE BONDS . | ||
| Riveting | Riveting aluminum parts . See 41 00... RIVETING ALUMINUM PARTS . | |
| Riveting steel parts . See 41 00... RIVETING STEEL PARTS . | ||
| Repair elements | ||
| Steel thread repairs . See 41 00... NOTES ON REPAIRING THREADS . | ||
| Painting | Corrosion protection . See 41 00... CORROSION PROTECTION . | |
| General Information. | ||
| Information / warning labels . Missing or damaged information/warning labels (e.g. tire inflation pressure) must be replaced. | ||