41 00... Workshop Equipment

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum workshop equipment requirements in order to ensure the correct and expert performance of body repairs:

The tools listed below must be used.

WORKSHOP EQUIPMENT REFERENCE CHART

	Steel		Aluminum
Tool	Structure	Outer skin	Structure	Outer skin
Bodywork tool assortment	x	x
Aluminum bodywork tool assortment			x	x
Bodywork saw	x	x
Single-handed grinder	x	x	x	x
Welding spot remover	x	x
MAG welding apparatus	x	x
MIG welding apparatus			x (E52 only)
Spot welding apparatus	x	x
Gas welder		x
Straightening system	x		x
Stud welding apparatus			x
Flame coating set			x
Universal riveting tool			x

IMPORTANT: In vehicles from model year 2001, higher-tensile and high-tensile steels are used in certain areas.
It is essential to check whether the spot-welding apparatus used conforms to the technical requirements of the currently recommended welding sets. Should you have any questions, please contact the country - specific Hotline.
The use of technically obsolete equipment may have serious consequences for the structure of the vehicle (e.g. in the event of a crash). In the end, this can result in safety and product liability risks which cannot be calculated.

Use and restrictions:

Definition of Recommendation:

All currently recommended spot welding sets comply with the requirements relating to reliable welding of today's and future BMW Group vehicles. A spot welding unit will loose its recommendation as soon as tests with materials and material combinations designated for future use in BMW Group vehicles return negative results. All previous application before the withdrawal of the recommendation shall remain unaffected.

BMW GROUP VEHICLES RETURN NEGATIVE RESULTS REFERENCE CHART

	Device designation	Manufacturer
Group 1 Devices currently no longer recommended	CR500	Car-O-Liner
	Spot9000	Tecna
	ATL 400V	Wielander&Schill
Group 2 Devices currently recommended (March 2007)	MIDIspot QSVM9000	Celette
	MIDIspot QSVM9000	Elmatech
	CR600	Car-O-Liner
	Multispot MI-100 Control	Elektron

Application options and restrictions of above devices.

VEHICLE APPLICATION CHART

Vehicle	Group 1	Group 2
E93	x Except A-pillar, B-pillar, sill	x
E70	x Except B-pillar	x
E64	x Except A-pillar, B-pillar, sill	x

NOTE: (March 2007)

All models not listed can be repaired using the Group 1 and Group 2 devices.