61 35 950 Removing and installing (replacing) control unit for comfort access system
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE .
NOTE:
The comfort access system is a radio-based system and can be interfered with by radio waves from other systems (e.g. mobile phone).
Necessary preliminary tasks:
- Remove side trim panel at rear right. See REMOVING SIDE TRIM PANEL or REMOVING SIDE TRIM PANEL (JCWGP) .
Vehicles from production date 03/2013:
- Remove right FRONT SEAT
NOTE:
Similar to graphic.
Unscrew nuts (1).
Disconnect plug connection (2) and remove control unit for Comfort Access System.
Replacement:
Carry out VEHICLE PROGRAMMING/ENCODING .