64 53 550 Removing and installing or replacing capacitor for heating and air conditioning system
Special tools required:
Avoid contact with refrigerant and refrigerant oil.
Follow all applicable SAFETY INFORMATION .
Risk of damage!
Restart engine only when A/C system has been correctly filled.
Read and comply with NOTES ON COMPRESSOR REPLACEMENT .
If air conditioning system is opened for more than 24 hours: REPLACE DESICCANT INSERT FOR A/C SYSTEM
Necessary preliminary tasks:
- Remove FRONT BUMPER TRIM
Release screws (1).
Tightening torque 64 53 1AZ .
Disconnect pressure and intake pipes.
Installation note:
Replace sealing rings.
Use special tool 00 9 030 to install sealing rings without damaging them.
Release screw (2).
Release screws (1).
Tightening torque 64 53 2AZ .
Lift out condenser (2).
Installation note:
Make sure brackets are seated correctly on condenser.
After installation:
- EVACUATE AND FILL heating and air conditioning system.