22 31 005 Removing and installing/replacing transmission support bracket

Necessary preliminary work:

Unlock latch mechanisms (1) and remove fuse box cover (2).

Fig 1: Identifying Latch Mechanisms And Fuse Box Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Push fuse box to one side.

Tightening torque 61 13 1AZ .

Fig 2: Identifying Fuse Box Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove holder (2).

Fig 3: Identifying Holder And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

IMPORTANT: Screws M10 8.8 must be replaced by screws M10 10.9.

Tightening torque 22 32 2AZ .

Slacken nut (2).

Tightening torque 22 32 3AZ .

Remove transmission support bracket.

Fig 4: Identifying Transmission Support Bracket Nut And Screws

Courtesy of BMW OF NORTH AMERICA, INC.