22 11 070 Removing and installing/replacing engine mounting bracket (R60)

Necessary preliminary work:

Release clamps (1) and detach charge air hose (2).

Installation note:

Install charge air hose (2) dry and free from grease.

Connecting branch on throttle valve must be dry and free from grease.

Fig 1: Identifying Charge Air Hose And Clamps

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) and remove ground strap.

Tightening torque 22 11 7AZ .

Unfasten screws (2).

Tightening torque 22 11 2AZ .

Unscrew nut (3).

Tightening torque 22 11 1AZ .

Remove engine mounting bracket.

Fig 2: Identifying Ground Strap Nut And Screws

Courtesy of BMW OF NORTH AMERICA, INC.