41 33 695 Removing and installing lock bridge

Necessary preliminary work: 

• Remove CENTER RADIATOR GRILLE
• Remove headlight. See REPLACING HEADLIGHT (HALOGEN) or REPLACING HEADLIGHT (XENON) .

Release screws (1).

Undo screws (2) for bonnet locks. See REMOVING AND INSTALLING/REPLACING RIGHT ENGINE COMPARTMENT LID LOCK or REMOVING AND INSTALLING/REPLACING LEFT HOOD/BONNET LOCK .

Only vehicles with turbocharger:

Lift out expanding rivet (3).

Release screws (4).

Tightening torque 51 11 7AZ

Release screws (1).

Undo screws (2) for bonnet locks.

Lift out expanding rivet (3).

Release PULL CABLE (4) for bonnet locks.

Undo screws (5) and remove lock bridge.

Tightening torque 51 11 7AZ