41 5.... Removing and installing door

IMPORTANT: Do not damage adjoining body components.

Open door.

Release screw on connector frame.

Front door:

Tightening torque 41 51 3AZ .

Rear door:

Tightening torque 41 51 3AZ .

Fig 1: Locating Screw On Connector Frame

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Secure door against closing.

Release screw (1) on door stop.

Front door:

Tightening torque 51 21 6AZ .

Rear door:

Tightening torque 51 22 4AZ .

IMPORTANT: Secure door against falling.

Release screws (2) and pull out of hinges.

Front door:

Tightening torque 41 51 1AZ .

Rear door:

Tightening torque 41 51 1AZ .

Fig 2: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Pull plug connection from door post, unlock by pulling out bar and detach.

Unhinge door by moving upwards and place it on a suitable surface.

Installation:

If necessary, adjust DOOR .

Fig 3: Pulling Plug Connection From Door Post

Courtesy of BMW OF NORTH AMERICA, INC.