51 11 180 Removing and installing/replacing ornamental grille in bumper panel

Necessary preliminary tasks:

R55/R56/R57 Version up to 08/2010:

R55/R56/R57 Version from 08/2010:

R58/R59:

NOTE: Work shown as example for R56version up to 08/2010.

If necessary, remove outside temperature sensor (1).

Release latch mechanisms (2) and remove ornamental grille (3).

Installation note:

Latch mechanisms on grille and bumper panel must not be damaged.

Fig 1: Identifying Outside Temperature Sensor, Latch Mechanisms, And Ornamental Grille

Courtesy of BMW OF NORTH AMERICA, INC.

In the case of replacement and appropriate version: