LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 91 (Cooling & Turbo System - Repair - R55 (N14)) >> Charge Air Cooler With Mount >> 17 51 000 Removing and installing/replacing intercooler (N14)

17 51 000 Removing and installing/replacing intercooler (N14)

WARNING: This page is about a different variant/trim than selected.
IMPORTANT: If the charge air hoses are not fitted without grease and dry, this will result in supercharger failure.

Fit charge air hoses dry and without grease.

Necessary preliminary tasks: 

Remove bumper trim  . See 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM .

Unfasten clip.

Detach left charge-air hose (1) from intercooler.

IMPORTANT: Fit charge air hoses dry and without grease.
NOTE: Illustration shows and text refers to the left side. The procedure is identical for the right side.
Fig 1: Identifying Left Charge-Air Hose
G04790105Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws.

Remove intercooler (1).

Fig 2: Locating Intercooler Screws
G04790106Courtesy of BMW OF NORTH AMERICA, INC.