54 13 055 Replacing seal for panorama sunroof frame
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
- Remove Complete Panorama Sunroof .
NOTE:
Follow Repair Instructions
for bonded seals on panorama sunroof
Pull off seal at contact edge starting from body cutout (peel off).
Installation:
- Clean bonding surface with adhesive remover
- Press seal without stretching (squashing).
- Stick on seal in sections.
- Establish seal joint.
IMPORTANT:
Do not touch bonding surface.
Surface temperature ≥20°C
Incorrect bonding of the seal will result in leakage.
Surface temperature ≥20°C
Incorrect bonding of the seal will result in leakage.