35 31 000 Removing and installing/replacing clutch pedal

Necessary preliminary tasks: 

• Remove bearing block  

Press pin (1) together and press out.

Detach locking clip (2).

Installation: 

Check bearing bushings of clutch pedal and replace if necessary.

Lightly grease bearing bushings.

Check retaining clip (2) and replace if necessary.

Make sure retaining clip (2) is correctly engaged.

Disengage return spring (3) and remove clutch pedal.

Fig 1: Identifying Pin, Clip And Return Spring

Courtesy of BMW OF NORTH AMERICA, INC.