Necessary preliminary tasks

WARNING: This page is about a different variant/trim than selected.

Release screws (1).

NOTE: To facilitate feeding out the front trim panel in the next work step, carefully pull instrument cluster (2) forwards in lower area.

Fig 1: Pulling Instrument Cluster Forward

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Fold down front trim panel for Car Communication Computer (2) upwards and feed out.

Fig 2: Identifying Car Communication Computer With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: "LIF" stands for Low Insert Force.

Open catch of LIF plug (2) in direction of arrow and feed out LIF cable (1).

Remove front trim (4) from Car Communication Computer (3).

Fig 3: Opening LIF Plug Catch

Courtesy of BMW OF NORTH AMERICA, INC.