62 10 125 Removing and installing complete instrument cluster
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)
.
Necessary preliminary tasks
- Clamp off BATTERY NEGATIVE LEAD
- Remove CENTRE CONSOLE TRIM
- Partially remove KNEE PROTECTION, PASSENGER'S SIDE
- Remove KNEE PROTECTION, DRIVER'S SIDE
Release screw (1).
Release screws (1).
Pull back complete instrument cluster (2) slightly.
Disconnect plug connections and remove instrument cluster (2).