67 61 040 Removing and installing/replacing folding sunroof drive unit

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks

NOTE: Secure folding sunroof drive unit (2) against falling out.

Release screws (1).

Tightening torque 54 34 9AZ .

Detach folding sunroof drive unit (2) in downward direction.

Unlock plug connection (3) and disconnect.

Remove folding sunroof drive unit (2).

Fig 1: Identifying Screws, Sunroof Drive Unit And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Insert gear (1) of folding sunroof drive unit (2) exactly in gear teeth (3).

Fig 2: Inserting Sunroof Drive Unit Gear In Gear Teeth

Courtesy of BMW OF NORTH AMERICA, INC.