54 34 359 Removing and installing/replacing rear crossbar trim panel

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Release left and right screws (1).

Fig 1: Identifying Trim Panel Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip trim panel (1).

Fig 2: Unclipping Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (1) must not be damaged.

If necessary, retrofit felt (2) in order to avoid rattling noises.

Fig 3: Identifying Clips

Courtesy of BMW OF NORTH AMERICA, INC.