51 13 105 Removing and installing/replacing trim on rear left or right wheel arch

Release clip (1).

Fold wheel arch trim (2) inwards slightly and release clip (3).

Installation: 

If necessary, replace faulty clips (1 and 3).

Fig 1: Identifying Rear Left Wheel Arch Trim With Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Feed trim (1) in area (A) towards rear out of bumper.

Release trim (1) from clips (2); if necessary, disconnect associated plug connection and remove.

Installation: 

If necessary, replace faulty clips (2).

Fig 2: Identifying Rear Right Wheel Arch Trim With Clips

Courtesy of BMW OF NORTH AMERICA, INC.

If replacing: 

Remove SIDE MARKER LAMP .