63 14 020 Removing and installing/replacing front left or right side marker light

WARNING: This page is about a different variant/trim than selected.

WARNING: Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .

Necessary preliminary tasks:

Turn bulb holder (1) in direction of arrow and pull out of side marker lamp (2).

Unscrew nuts (3).

Remove side marker lamp (2) in direction of arrow from wheel arch trim (4).

Installation:

Make sure sealing ring is correctly fitted on BULB HOLDER (1).

Make sure bulb holder (1) is correctly engaged on side marker lamp (2).

Fig 1: Turning Bulb Holder To Pull Out From Side Marker Lamp

Courtesy of BMW OF NORTH AMERICA, INC.