51 13 102 Removing and installing/replacing cover on front left or right wheel arch

If necessary, release clip on front wheel arch cover (1).

Bend wheel arch panel (1) inwards slightly and release clip (2).

Installation note: 

If necessary, replace faulty clip (2).

Fig 1: Identifying Front Wheel Arch Cover With Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Feed cover (1) in area (A) towards front out of bumper.

Release cover (1) from clips (2); if necessary, disconnect associated plug connection and remove.

Installation note: 

If necessary, replace faulty clips (2).

Fig 2: Identifying Cover Feeding Area With Clips

Courtesy of BMW OF NORTH AMERICA, INC.

If replacing: 

Remove SIDE MARKER LIGHT .