24 35 560 Replacing speed sensor (output) (AISIN)
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
After completion of work, check TRANSMISSION OIL LEVEL
.
Make a note of drained ATF quantity.
Required replenishment quantity approx. 4.5 liters.
Make a note of drained ATF quantity.
Required replenishment quantity approx. 4.5 liters.
IMPORTANT:
Use only the approved OPERATING FLUID
in this automatic transmission.
Otherwise the automatic transmission may incur extensive damage!
Do not drain oil before the transmission has cooled down.
Otherwise the automatic transmission may incur extensive damage!
Do not drain oil before the transmission has cooled down.
Necessary preliminary work
- Remove HYDRAULIC SHIFT UNIT
Release screw (1).
Tightening torque: 24 11 20AZ .
Remove sensor (2).