5. Topping up/extracting fluid

WARNING: This page is about a different variant/trim than selected.

the hydraulic fluid does not have to be changed because the system is filled with life-time fluid. Only the APPROVED HYDRAULIC FLUID may be used in the event of leaks.
Follow BRIEF INSTRUCTIONS .
Remove hydraulic unit without detaching lines.
Fluid is supplied with the repair kits (e.g. banjo bolts/seals, hoses, cylinders) and is available separately.
Pour in fluid with bottle through filling orifice.
In the event of overfilling, allow the fluid to escape through the filling orifice and catch the fluid in a suitable container.