63 99 401 Replacing bulb for left or right license plate light
WARNING: This page is about a different variant/trim than selected.
WARNING:
Follow instructions for handling light bulbs (exterior lights
).
Necessary preliminary tasks:
- Remove license plate light .
Turn bulb holder (1) in direction of arrow and pull out of number/license plate light (2).
Installation:
Make sure bulb holder (1) is correctly engaged on number/license plate light (2).
Remove bulb (1) from bulb holder (2) in direction of arrow.
Installation:
- Note bulb type . See LIGHTS - TECHNICAL DATA -- S CLUBMAN (R55) .
- Make sure sealing ring (3) is correctly seated on bulb holder (2)