63 99... Instructions for handling light bulbs (exterior lights)
WARNING: This page is about a different variant/trim than selected.
WARNING:
Xenon headlights: Danger to life due to high voltage!
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.
WARNING:
Halogen lamps are under pressure:
To avoid injury, wear protective goggles and gloves.
To avoid injury, wear protective goggles and gloves.
WARNING:
LEDs are potentially dangerous due to their dazzling effect:
Do not look directly and unprotected into the light radiating from the LED.
IMPORTANT:
To prevent short-circuiting, disconnect light bulbs from voltage supply prior to replacement.
Do not touch the glass bulbs in new lights bulbs as even the slightest contamination will burn in and reduce bulb service life.
Only touch light bulbs with clean gloves or a clean cloth.
Do not expose light bulbs to mechanical vibrations.
Use only recommended light bulbs.
Follow the light bulb manufacturer's instructions without fail.