63 99 295 Replacing bulb for left or right auxiliary direction indicator

WARNING: This page is about a different variant/trim than selected.

WARNING: Follow instructions for handling light bulbs (exterior lights ).

Necessary preliminary tasks:

Slide trim with auxiliary direction indicator (1) forwards and remove in direction of arrow from side panel.

Installation:

Make sure trim with auxiliary direction indicator (1) is correctly engaged on side panel.

Fig 1: Sliding Trim With Auxiliary Direction Indicator

Courtesy of BMW OF NORTH AMERICA, INC.

Turn bulb holder (1) counterclockwise and remove trim containing auxiliary direction indicator (2).

Installation:

Make sure bulb holder (1) is correctly engaged on auxiliary direction indicator.

Fig 2: Identifying Plug Connection And Auxiliary Direction Indicator Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Pull bulb for auxiliary direction indicator (1) out of bulb holder (2).

Installation:

Make sure sealing ring (3) is correctly seated on bulb holder (2).

Fig 3: Identifying Auxiliary Direction Indicator, Bulb Holder And Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.