63 99 072 Replacing halogen bulb for headlight on left

WARNING: This page is about a different variant/trim than selected.

WARNING: Follow instructions for handling light bulbs (exterior lights ).

Unlock retaining tab (1) and remove protective cap (2) from headlight.

Installation:

Protective cap (2) must be correctly engaged. Check seal. Replace protective cap (2) if necessary. Comply with Instructions for replacing the protective cap .

Fig 1: Identifying Retaining Tab And Headlight Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release lock (1) and pull halogen bulb for headlight (2) out of headlight.

Disconnect plug connection (3) and remove halogen bulb for headlight (2).

Installation:

Make sure halogen bulb for headlight (2) is correctly seated.

Fig 2: Identifying Lock, High-Beam Headlight And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.