63 99 002 Replacing halogen bulb for high-beam headlight on left

WARNING: This page is about a different variant/trim than selected.

WARNING: Follow instructions for handling light bulbs (exterior lights ).

Unlock retaining tab (1) and remove cover (2) from headlight.

Installation:

Make sure cover (2) is correctly seated on headlight.

Fig 1: Identifying Retaining Tab And Headlight Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release lock (1) and pull halogen bulb for high-beam headlight (2) out of headlight.

Disconnect plug connection (3) and remove halogen bulb for high-beam headlight (2).

Installation:

Make sure halogen bulb for high-beam headlight (2) is correctly seated.

Fig 2: Identifying Lock, High-Beam Headlight And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.