63 25 000 Removing and installing/replacing auxiliary brake light
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
- Remove rear roof strip . See 51 13 298 REMOVING AND INSTALLING/REPLACING REAR ROOF STRIP .
Unlock catch for plug connection holder (1) and remove from roof strip (5).
Feed wiring harness for auxiliary brake light out of fixtures (2).
Carefully unlock retaining lugs (4) and remove auxiliary brake light (3) towards rear from roof strip (5).
Installation:
Retaining lugs (4) must not be damaged.
Make sure auxiliary brake light (3) is correctly engaged on roof strip (5).
Make sure wiring harness for auxiliary brake light is correctly routed.