LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 107 (General Electrical System - Repair - S Clubman (R55)) >> Ecus, Modules >> 61 35 950 Removing and installing (replacing) control unit for comfort access system

61 35 950 Removing and installing (replacing) control unit for comfort access system

WARNING: This page is about a different variant/trim than selected.
IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection)  . 
NOTE: The comfort access system is a radio-based system and can be interfered with by radio waves from other systems (e.g. mobile phone).

Necessary preliminary tasks: 

Unscrew nuts (1).

Disconnect plug connection (2) and remove control unit for Comfort Access System.

Fig 1: Identifying Control Unit Plug Connection And Nuts
G04798029Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out vehicle programming/coding.