51 16... Removing and installing/replacing holder for inside mirror

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Remove inside mirror .
Remove ROOF OPERATING UNIT .

Lever out the cover (1) from the roof operating facility. If necessary, disconnect the microphone plug connection and remove the cover (1).

Fig 1: Removing Trim Off Roof Operating Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1). Unlock latch mechanisms (2). Lower the roof operating facility (3). Disconnect the associated plug connections and remove the roof operating facility (3).

Fig 2: Identifying Catches And Bolts

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: If necessary, convert bulbs.