61 31 029 Removing and installing/replacing roof operating unit

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection) .

Lever trim (1) off roof operating unit.

If necessary, disconnect microphone plug connection and remove trim (1).

Fig 1: Removing Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Release bolts (1).

Unlock catches (2).

Lower roof operating unit (3).

Disconnect associated plug connections and remove roof operating unit (3).

Replacement:

If necessary, remove bulbs.

Fig 2: Identifying Roof Operating Unit, Catches And Bolts

Courtesy of BMW OF NORTH AMERICA, INC.