41 33 040 Replacing front wall

Refer to relevant service information in BODY, GENERAL .

The graphics are schematic representations and are to be applied to the relevant vehicle type.

The following new body parts are required:

• Lock bridge (1)
• Front panel (2)

Fig 1: Identifying Lock Bridge And Front Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Remove SUPPORT FOR BUMPER TRIM .

Release screws (1) on both sides of vehicle.

Tightening torque 51 11 7AZ

Release screws (2) on both sides of vehicle.

Tightening torque 41 33 4AZ

Fig 2: Release Screws On Both Sides Of Vehicle

Courtesy of BMW OF NORTH AMERICA, INC.