11 36 047 Removing and installing/replacing inlet and exhaust adjustment units on left side (N62): Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

11 9 190
11 9 460
11 9 461
11 9 462
11 9 463

(cylinder bank 5 to 8)

Read fault memory and make a documentary record.

Remove servomotor for left eccentric shaft. Refer to 11 37 022 Removing and installing/replacing servomotor for left eccentric shaft (N62) .

Remove left cylinder head cover. Refer to 11 12 005 Removing and installing / sealing left cylinder head cover (N62 / N62TU) .

Remove all spark plugs on cylinder bank 5 to 8.

If necessary, remove fan cowl.

Remove left timing case cover. Refer to 11 14 080 Removing and installing top left timing case cover (N62) .