64 11 872 Removing and installing/replacing servodrive for blending flap

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2005 BMW Z4, and 2004 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove controller for heater - A/C fan. Refer to 64 11 225 REPLACING CONTROLLER FOR HEATER - A/C FAN .

Unlock plug connection (1) and disconnect.

Fig 1: Removing Servodrive For Blending Flap

Courtesy of BMW OF NORTH AMERICA, INC.

Press lock (2) and pull out servodrive for blending flap (3) in direction of arrow.

Installation:

Follow repair instruction "Installing servodrive". Refer to 64 11... INSTALLING SERVODRIVE .