LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 701 (EXTERIOR/INTERIOR TRIM - REPAIR INSTRUCTIONS - 525i) >> Trunk latch locks >> 51 24 130 Removing and installing/replacing locking bracket for trunk lid lock

51 24 130 Removing and installing/replacing locking bracket for trunk lid lock

WARNING: This page is about a different car, the 2003 BMW 525i, 2002 BMW 525i, and 2001 BMW 525i. However, it is still accessible from the selected car via links, so may be relevant.

Remove finisher strip from top tail panel, refer to 51 46 050 REMOVING AND INSTALLING/REPLACING FINISHER FOR TOP OF REAR APRON. 

Unfasten screws and remove locking bracket (lower section of trunk lid lock).

Installation: 

Adjust lower section of trunk lid.

Fig 1: Removing Locking Bracket (Lower Section Of Trunk Lid Lock)
G03128255Courtesy of BMW OF NORTH AMERICA, INC.