51 12 742 Replacing one impact absorber for rear bumper
WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, and 2001 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
(Bumper Removed)
If necessary, remove rear bumper. Refer to 51 12 000 REMOVING AND INSTALLING COMPLETE REAR BUMPER .
Remove support on side member, refer to Removing trim for tail panel, top. Refer to 51 46 050 REMOVING AND INSTALLING/REPLACING FINISHER FOR TOP OF REAR APRON .
Release nuts (1) on inside and remove shock absorber.
Installation:
Tightening torque, (24 N.m.).