51 11 701 Replacing left or right bracket for front bumper

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, and 2001 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary Preliminary Tasks:

Bumper trim removed.

If necessary, remove front bumper trim. Refer to 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM (FROM 10/03) or 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM (UP TO 10/03) .

Version Up To 10/2003:

Compress catches (1) and detach bracket (2) towards bottom.

Fig 1: Locating Catches On Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) on bracket (2) must not be damaged.

Fig 2: Identifying Catches On Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Version From 10/2003:

Release screws (1) and detach metal nuts (2).

Compress catches (3) and detach bracket (4) towards bottom.

Fig 3: Locating Catches On Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1 and 2) on bracket (3) must not be damaged.

Fig 4: Identifying Catches On Bracket

Courtesy of BMW OF NORTH AMERICA, INC.