LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4156 (Engine Assembly And Cylinder Head - Repair - F12) >> Engine Assembly >> 11 00 Mounting Engine On Assembly Stand (S63T)

11 00 Mounting Engine On Assembly Stand (S63T)

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

WARNING:

Remove engine with hoist and special tool 11 0 020 .

Fit special tool 11 8 930 on engine.

Engine weighs approx. 280 kg.

Necessary preliminary tasks: 

- Remove front axle with engine. See 31 10 001 COMPLETELY REMOVING AND INSTALLING THE FRONT AXLE WITH ENGINE AND TRANSMISSION (S63T0, MANUAL GEARBOX) .

- Remove engine from front axle. See REMOVING AND INSTALLING ENGINE ON FRONT AXLE (S63T 0) WITH GS7D36SG TRANSMISSION .

- Clean contact surfaces.

Use special tool 11 8 931 to mount special tool 11 8 932 .

Insert screws (1 and 2).

Tightening torque: 11 11 9AZ .

Fig 1: Identifying Special Tool And Screws
G00554311Courtesy of BMW OF NORTH AMERICA, INC.

Use special tool 11 8 931 to mount engine on special tool 00 2 300 .

Tightening torque: 11 11 10AZ

Illustration shows engine N63.

Fig 2: Mounting Engine On Assembly Stand
G05907609Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals