11 12 040 Removing and installing all ignition coils and injector wells (N55)
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove CYLINDER HEAD COVER .
- REMOVE all injectors.
Release screws (1).
Tightening torque: 11 12 8AZ .
Check fitting bushes (1) for damage.
Installation note:
Replace gasket (2).
Assemble engine.