32 00 155 Kinematics Diagnosis System wheel alignment with ride height measurement without loading the vehicle: Notes

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

General information

Prerequisite

Only BMW approved wheel and tire combinations are installed on the vehicle. The tread depth on the left and right differs by a maximum of 2 millimeters.

Safety instructions

TECHNICAL INFORMATION

Only carry out wheel alignment using a Kinematics Diagnosis System with ride height measurement and without vehicle load if the technical prerequisites have been complied with.
If the technical prerequisites are not complied with or this process concerns a damaged vehicle, carry out wheel alignment using a Kinematics Diagnosis System with vehicle load up to design position.
For more information see: 32 00 150 CARRY OUT KINEMATICS DIAGNOSIS SYSTEM WHEEL ALIGNMENT WITH VEHICLE LOAD UP TO DESIGN POSITION .

Preprocesses