31 51 065 Replacing O-ring for bearing block

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove BEARING SUPPORT .

Lever out O-ring (1) from bearing block (2) with a screwdriver.

Installation note:

Insert O-ring (1) in groove and coat with front axle differential oil.

Replace RADIAL SHAFT SEAL .

Fig 1: Identifying O-Ring And Bearing Block

Courtesy of BMW OF NORTH AMERICA, INC.