65 12 071 Removing and installing/replacing amplifier

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

NOTE: Comply with notes on HANDLING OPTICAL FIBRES .

Necessary preliminary tasks:

Clamp off NEGATIVE BATTERY CABLE .
Remove LUGGAGE COMPARTMENT WHEEL ARCH PANEL ON LEFT .

Release screw (1).

Remove amplifier (4) including holder (2).

Unlock plug connections (3) and disconnect.

Replacement:

Remove amplifier (4) including holder (3).

Fig 1: Identifying Amplifier, Holder, Plug Connections And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Lugs (1) must be correctly slid into guide (2).

Check that amplifier (3) is securely seated.

Fig 2: Identifying Amplifier, Lugs And Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

For vehicle with production date up to 09/2010 , carry out conversion in the diagnosis system via path:

Vehicle
Conversions
Conversion hi-fi system

NOTE: On vehicle with production date after 09/2010 , no vehicle programming/encoding needs to be carried out!