64 11 902 Replacing interior temperature sensor blower (A/C control panel)

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 450

Necessary preliminary tasks:

Remove RADIO AND IHKA CONTROLS

Release screws (1).

Tightening torque 61 31 2AZ .

NOTE: Use special tool 00 9 450 to tighten screws.

Remove fan (2) from IHKA controls (3).

Installation note:

Make sure pins (4) are correctly located on fan (2).

Fig 1: Identifying Fan Screws From IHKA Controls

Courtesy of BMW OF NORTH AMERICA, INC.