LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3801 (Heating And Air Conditioning - Repair - F13) >> Condenser And Dryer With Lines >> 64 53 521 Replacing safety pressure switch (S63)

64 53 521 Replacing safety pressure switch (S63)

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Danger of injury!
Refrigerant circuit is under high pressure!
Avoid contact with refrigerant and refrigerant oil.
Read and comply with safety instructions:
IMPORTANT: Risk of damage!
Restart engine only when A/C system has been correctly filled.
Follow INSTRUCTIONS for opening and replacing parts in refrigerant circuit.
If air conditioning system is opened for more than 24 hours: Replace dryer insert for air conditioning  . See 64 53 517 REPLACING DESICCANT INSERT FOR AIR CONDITIONING SYSTEM  or 64 53 518 REPLACING DESICCANT INSERT FOR A/C SYSTEM (CAPACITOR REMOVED) 

Necessary preliminary tasks: 

Unfasten plug connection (1) and disconnect.

Release safety pressure switch (2).

Tightening torque 64 53 8AZ .

Fig 1: Identifying Safety Pressure Switch Plug Connection
G09929572Courtesy of BMW OF NORTH AMERICA, INC.

After installation: