64 53 518 Replacing desiccant insert for A/C system (capacitor removed)
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
IMPORTANT:
Risk of damage!
Restart engine only when A/C system has been correctly filled.
Follow INSTRUCTIONS for opening and replacing parts in refrigerant circuit.
If air conditioning system is opened for more than 24 hours:
replace desiccant insert for air conditioning system
Restart engine only when A/C system has been correctly filled.
Follow INSTRUCTIONS for opening and replacing parts in refrigerant circuit.
If air conditioning system is opened for more than 24 hours:
replace desiccant insert for air conditioning system
Follow INSTRUCTIONS ON REPLACING DESICCANT INSERT .
Remove protective cap (1) from capacitor for the heating and air conditioning system (2).
Press sealing cap (1) inwards and remove circlip (2).
Remove the sealing cap (2) from capacitor of the heating and air conditioning system (3) with an inserted screw (1).
Installation note:
Replace sealing rings (1).
Use special tool 00 9 030 to fit sealing rings (1) without damaging them.
IMPORTANT:
Risk of damage!
Removal is made more difficult if rib (2) is damaged!
Removal is made more difficult if rib (2) is damaged!
Remove desiccant insert for heating and air conditioning system (1) in direction of arrow from capacitor of the heating and air conditioning system (2).
After installation:
- Add final details to vehicle
- EVACUATE AND FILL AIR CONDITIONING SYSTEM