61 13 050 Removing and installing/replacing power distribution box in passenger compartment

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Observe SAFETY INFORMATION for handling the vehicle battery.

Necessary preliminary tasks:

Clamp off BATTERY LEAD FROM NEGATIVE CONNECTION POINT
Detach both battery cables for negative terminal in F03
Remove RIGHT GLOVE BOX WITH HOUSING

Disconnect plug connection (1) from power distribution box in passenger compartment (3) and junction box electronics.

Unfasten screws (2).

Tightening torque 61 14 1AZ .

Feed out power distribution box in passenger compartment (3) from retaining clips (4) in direction of arrow.

Unlock and disconnect PLUG CONNECTIONS behind.

Fig 1: Identifying Power Distribution Box, Plug Connection, Screws, And Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Modify JUNCTION BOX ELECTRONICS
Modify fuses