61 34... Removing and installing/replacing 12-V socket in the front storage compartment

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

61 0 250

Necessary preliminary tasks:

Remove CUP HOLDER INSERT

Pull the 12-V socket from the storage compartment housing using special tool 61 0 250 until the connector is below on the light ring.

Fig 1: Pulling 12-V Socket Using Special Tool (61 0 250)

Courtesy of BMW OF NORTH AMERICA, INC.