67 61 005 Removing and installing (replacing) electric motor with gearbox (front) for operation of glass tilt sunroof

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks:

Remove front ROOFLINER COVER

NOTE: Secure electric motor with gearbox for operation of glass tilt sunroof (3) against falling out.

Unfasten plug connection (1) and disconnect.

Unfasten screws (2).

Tightening torque 54 13 1AZ .

NOTE: Screws (1) are microencapsulated.

Thread out and remove the electric motor and transmission for the glass tilt sunroof operation (3) from the headlining (4).

Fig 1: Identifying Glass Tilt Sunroof, Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Insert gear (1) of electric motor with gearbox for operation of glass tilt sunroof (2) exactly in gearing (3).

Fig 2: Identifying Gear, Teeth, And Slide/Tilt Sunroof Electric Motor

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Initialize GLASS TILT SUNROOF .