LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3791 (Body Equipment - Repair - F13) >> Trunk Latch, Locks >> 51 24 130 Removing and installing/replacing striker for tailgate lock

51 24 130 Removing and installing/replacing striker for tailgate lock

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Unfasten screws (2).

Tightening torque 51 24 3AZ .

Remove striker (1) for rear lid lock.

Installation note: 

Adjust REAR LID LOCK .

Fig 1: Identifying Striker And Screws
G10062829Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Striker and tailgate lock must not be greased.